Unbreakable® Telescopic Umbrella Model U-303 Fully Assembled (ready to use)

Unbreakable® Telescopic Umbrella Model U-303 is offered in two versions:
— DIY Assembly kit — for customers who want to save on our cost of assembly and don’t mind spending on it about 8 minutes, plus a 24-hour wait for a threadlocker to cure.
— Fully Assembled — for customers who are familiar with friction-locked telescopic shafts, and want it ready to use out of a box, even though it costs more than the DIY Assembly kit. This page describes the Fully Assembled version.

Unbreakable® Telescopic Umbrella Model U-303 vs. two-by-four

Unbreakable® Telescopic Umbrella model U-303 is shipped with tools needed for its maintenance, because it has parts that may require replacing due to wear-and-tear. These parts are the canopy (like our previous telescopic models), two springs located in its shaft, and the umbrella’s grip — in case it is scratched or cracked.

Both springs are very sturdy, unlikely to wear out, but knowing that reputable manufacturers of products with friction locks similar to that of model U-303 offer replacement springs, we decided to make our springs replaceable too. The grip is hard to break, but we know that some users will put scratches on it by hitting hard objects with it, so we made it replaceable too.

Replacing the above-mentioned parts, and performing other maintenance, is simple, once you see how Model U-303 is assembled. To see it assembled, click here. You will also see these assembly instructions, plus an extended version of the video on how to use model u-303, when you click Add to cart button.

The Unbreakable® Telescopic (Collapsible) Umbrella protects

The Unbreakable® Telescopic Umbrella protects against elements in every meaning of the word, be it hail, rain (it is covered in state-of-the-art waterproof fabric), or whatever. . . . It is as strong and hefty as a steel pipe — it weighs 1 lb and 3.2 oz (545 g).

See how Unbreakable® Telescopic Umbrella Model U-303 compares to a differently constructed telescopic umbrella, for example, the UZI® Tactical Collapsible Umbrella.

Unbreakable® Telescopic Umbrella vs. UZI® Tactical Collapsible Umbrella.

BTW, the umbrella’s finial (the large screw at the center of the umbrella’s canopy) is made of carbon steel, and massive enough to serve as an Emergency Car Window Breaker.

Unbreakable® Telescopic Umbrella comes with an Emergency Car Window Breaker.

Our Unbreakable® Telescopic Umbrellas model U-303 perform in rain and wind just like the highest quality rain umbrellas. Frames of Unbreakable® Telescopic Umbrellas Model U-303 are hand-made, with telescopic shafts made of high-strength steel and aircraft aluminum, and canopy supports of polyester-fiberglass laminates. Telescopic shafts of these frames can support well over 100-kg (220-lb) weight when fully extended and, if not abused, will last more than a lifetime. Frames of Unbreakable® Telescopic Umbrellas are warranted not to break under normal use (see our Limited Five (5) Year Warranty).

Use and Care Instructions
Not following these instructions exactly voids the Unbreakable® Telescopic Umbrella Model’s U-303 warranty. It is a buyer’s responsibility to learn and strictly follow these instructions. Malfunctions and defects of the Unbreakable® Telescopic Umbrella Model’s U-303, caused by deviating from our instructions, are the buyer’s responsibility, not ours.
Once again, not following our instructions exactly voids the Unbreakable® Telescopic Umbrella Model’s U-303 warranty.
We honor warranty claims only from original purchasers of our products, who have accepted our Condition for Purchase.

Unbreakable® Telescopic Umbrella Model U-303 — How to Use It. Pay special attention to a procedure shown from minute 2 (2:00) to minute 2 and 55 seconds (2:55).

Unbreakable® Telescopic Umbrella Model U-303 — How to Assemble It. Watch Model U-303 being assembled so to know how to perform its maintenance.

Please note: The end tube of the Unbreakable® Telescopic Umbrella Model’s U-303 telescopic shaft is made of high-strength construction steel, not stainless steel, and so are parts inside that tube. Should water get inside the shaft, the shaft should be removed from the canopy, and the retaining-spring’s assembly should be unscrewed from the shaft, so to remove water from the shaft, dry its inside, and then oil it. Oiling is to be done by putting a drop of machine oil inside the end tube and then moving the friction-release mechanism back and forth by the umbrella’s handle.

Whenever your umbrella gets wet, leave it open to dry. Allow your umbrella’s canopy to dry fully before folding. Otherwise, mold will grow on the umbrella’s fabric. As mold grows, it creates enzymes, which digest the fabric’s fibers on which it is growing, causing permanent fabric damage and weakening, with a result like this case described.

The Unbreakable® Telescopic Umbrella is for defending against….

IMPORTANT!
Our Unbreakable® Telescopic Umbrella is for defending against elements (in every meaning of the word) and not for clowning. It is covered in a high-quality waterproof fabric, not in abrasion proof or slash proof fabric, because it has to look, weigh, and work like a normal umbrella, so do not expect this fabric to be undamaged if you strike objects with the Unbreakable® Telescopic Umbrella.